Bluetooth network connection & pairing

Pairing Bluetooth devices has been designed to be easy, but Bluetooth can also support networking.


Bluetooth Tutorial / Summary Includes:
Bluetooth technology basics     Radio interface     File transfer     Bluetooth profiles     Pairing & networking     Security    


The most common method of using Bluetooth is to pair two devices like a set of headphones and a mobile phone or laptop. This provides a convenient wire-less connection.

Bluetooth pairing in this manner is well established and very easy to achieve, but it is also possible to set up networks. This capability has been available since the inception of Bluetooth, but with Bluetooth 5, this capability has been enhanced to accommodate many IoT applications.

The Bluetooth specification defines a variety of forms of Bluetooth network connection that may be set up. In this way Bluetooth networking is a particularly flexible form of wireless system for use in a variety of short range applications.

Bluetooth network connection basics

There are a variety of ways in which Bluetooth networks can be set up. In essence Bluetooth networks adopt what is termed a piconet topology. In this form of network, one device acts as the master and it is able to talk to a maximum of seven slave nodes or devices.

The limit of seven slave nodes in a Bluetooth network arises from the three bit address that is used. This number relates to the number of active nodes in the Bluetooth network at any given time.

Bluetooth scatternets

Bluetooth network connections are also able to support scatternets, although because of timing and memory constraints this form of Bluetooth network has rarely been implemented. For a Bluetooth scatternet, a slave node or slave device is able to share its time between two different piconets. This enables large star networks to be built up.

Bluetooth connection basics

The way in which Bluetooth devices make connections is more complicated than that associated with many other types of wireless device. The reason for this is the frequency hopping nature of the devices. While the frequency hopping reduces the effects of interference, it makes connecting devices a little more complicated.

Bluetooth is a system in which connections are made between a master and a slave. These connections are maintained until they are broken, either by deliberately disconnecting the two, or by the link radio link becoming so poor that communications cannot be maintained - typically this occurs as the devices go out of range of each other.

Within the connection process, there are four types of Bluetooth connection channel:

  • Basic piconet channel:   This Bluetooth connection channel is used only when all 79 channels are used within the hop-set - it is now rarely used as the Adaptive piconet channel is more often used as it provides greater flexibility.
  • Adapted piconet channel:   This Bluetooth connection channel is used more widely and allows the system to use a reduced hop-set, i.e. between 20 and 79 channels. Piconet channels are the only channels that can be used to transfer user data.
  • Inquiry channel:   The Bluetooth connection channel is used when a master device finds a slave device or devices within range.
  • Paging channel:   This Bluetooth connection channel is used where a master and a slave device make a physical connection.

Bluetooth pairing

In order that devices can connect easily and quickly, a scheme known as Bluetooth pairing may be used. Once Bluetooth pairing has occurred two devices may communicate with each other.

Bluetooth pairing is generally initiated manually by a device user. The Bluetooth link for the device is made visible to other devices. They may then be paired.

The Bluetooth pairing process is typically triggered automatically the first time a device receives a connection request from a device with which it is not yet paired. In order that Bluetooth pairing may occur, a password has to be exchanged between the two devices. This password or "Passkey" as it is more correctly termed is a code shared by both Bluetooth devices. It is used to ensure that both users have agreed to pair with each other.

The process of Bluetooth pairing is summarised below:

  • Bluetooth device looks for other Bluetooth devices in range:   To be found by other Bluetooth devices, the first device, Device 1 must be set to discoverable mode - this will allow other Bluetooth devices in the vicinity to detect its presence and attempt to establish a connection.
  • Two Bluetooth devices find each other:   When the two devices: Device 1 and device 2 find each other it is possible to detect what they are. Normally the discoverable device will indicate what type of device it is - cellphone, headset, etc., along with its Bluetooth device name. The Bluetooth device name is the can be allocated by the user, or it will be the one allocated during manufacture.
  • Prompt for Passkey:   Often the default passkey is set to "0000", but it is advisable to use something else as hackers will assume most people will not change this.

    However many more sophisticated devices - smartphones and computers - both users must agree on a code which must obviously be the same for both.
  • Device 1 sends passkey:   The initiating device, Device 1 sends the passkey that has been entered to Device 2.
  • Device 2 sends passkey:   The passkeys are compared and if they are both the same, a trusted pair is formed, Bluetooth pairing is established.
  • Communication is established:   Once the Bluetooth pairing has occurred, data can be exchanged between the devices.

Practical elements of Bluetooth pairing

Normally Bluetooth devices will pair very easily. Dependent upon the device there may be slightly different instructions for pairing devices.

For some devices with limited accessibility for control, a button may need to be pressed for certain time to put it into a pairing mode. It will then search for devices with which to pair. If pairing with similar devices they will automatically pair when placed in pairing mode and they discover each other.

For devices like mobile phones and laptops, they will constantly look for devices with which to pair and then the pairing will need to be accepted before pairing takes place. This provides additional security.

On occasions some devices may have difficulty in pairing. It may be that they do not have the required profiles available, or it may be that the device is not fully Bluetooth compatible. There are some manufacturers who may not fully manufacture to the Bluetooth specification, even though they are advertised as Bluetooth.

Once the Bluetooth pairing has been established it is remembered by the devices, which can then connect to each without user intervention.

If necessary, the Bluetooth pairing relationship may be removed by the user at a later time if required.


Normally Bluetooth pairing and network setup is very easy. One of the advantages of Bluetooth is that it is easy for even non-technical people to use effectively.



Wireless & Wired Connectivity Topics:
Mobile Communications basics     2G GSM     2G GPRS     2G GSM EDGE     3G UMTS     3G HSPA     4G LTE     5G     LMR / PMR     WiFi     IEEE 802.15.4     DECT cordless phones     NFC- Near Field Communication     Ethernet     Serial data     USB     Z-Wave     SigFox     LoRa    
    Return to Wireless & Wired Connectivity